MLLT

Support Downloads:
Databases Folder
General info Folder

MODEL MLLT LIFE/MISSTESTER
The Markenrich model MLLT is intended for use in relay contact monitoring where extended cycling and error reporting is required. Up to 128 relay contacts may be monitored simultaneously while keeping miss/stick or pass/fail records on each one. Sense levels may be defined from millivolts to tens of volts, AC or DC.

The full 128 contact capacity need not be used at once. The system is divided into 8 groups of 8 channels, each being able to handle a double throw contact. Each group is capable of being operated independently of the other with its own cycle count. Any group may be programmed to begin a cycle count and then operate autonomously until stopped.

The model MLLT is an IEEE-488 bus instrument. All control functions and data commands are sent to the MLLT over this bus from a controller such as an IBM personal computer. Accompanying software is available that allows you to take full advantage of the MLLT's features. The operation is menu oriented and may be learned very quickly.
Contact failure reporting capabilities include the following:
Individual contact failure count
Group total failure count
Sequence of failure including cycle no.
Print failure summary
Store failure counts to file

In addition, the MLLT will test pull-in and drop-out voltage when used with an optional external power supply. There is also a coil current soak function for use when temperature cycling is required. All relay coils common to a group are cycled on and off by internal solid state drivers.

SPECIFICATION SUMMARY:
Max. no. contacts 128
Contact organization 8 groups of 8 ch.
Contact type Form A, B or C
Max. no. cycle 65535 per seg. up to 9 million
Sense level 0 - 40.95 mV, 0 - 409.5 mV
Max. contact load 270 VAC
Max. coil voltage 60 VDC
Max coil current 3 A per group

Additional Test Capabilities:
Pull-In Voltage 0 - 60 VDC
Drop-Out Voltage 0 - 60 VDC

Power Requirements: 115 VAC, 60 W. Weight: 9.1 Kg / 20 lbs. Dimensions: 8X17X14 inches.